Hamilton Forklift Training Course

Hamilton Forklift Training Course - Industry and federal regulators have established the criteria for forklift safety training based on their current standards and regulations. Individuals wanting to use a forklift should finish a forklift training course prior to making use of one of these equipment. The accredited Forklift Operator Training Program is designed to offer people training with the practical skills and information to become a forklift operator.

There are forklift operation safety regulations that must be followed pertaining to pre-shift inspections, and rules for lifting and loading.

An inspection checklist must be done and submitted to the supervising authority prior to starting a shift. When a maintenance problem is uncovered, the use of the specific equipment must be stopped until the issue has been addressed. To be able to indicate the machinery is out of service, the keys need to be removed from the ignition and a warning tag placed in a location that is seen.

Safety regulations for loading will comprise checking the load rating capacity on the forklift to determine how much the machine can handle. When starting the equipment, the forks should be in the down position. Remember that there is a loss of approximately 100 pounds carrying capacity for every one inch further away from the carriage which the load is carried.

To be able to safely lift a palletized load, drive the forklift to the pallet and halt with the fork three inches from the load. Level the mast until it is at right angles to the load. Raise the forks to an inch underneath the slot on the pallet and drive forward. Afterward lift forks four inches. Tilt back the load to secure it for moving. Drive the lift in reverse if the load obscures frontal vision. Check behind and honk in order to warn other employees. Never allow forks to drag on the ground.

The load must be loaded by the forklift in such a way that ensures the load is secure and will not create a hazard to other objects or people. Restraining loads is required for materials that might shift during transport and destabilize the forklift.

Drums can be strapped together so as to avoid shifting and movement of the drums. Operators of forklifts should drive slowly when moving liquids, to reduce instability in the forklift.

Click to Download the pdf