Hamilton Overhead Crane Operator Training

Hamilton Overhead Crane Operator Training - The course teaching overhead crane operator training has been meant specifically to instruct trainees on the basics of pre-shift inspections and overhead crane/sling operation. The programs are instructed by expert trainers and consultants. Well-trained employees are more productive and efficient, that really saves on expenses associated with property damage, merchandise damage, and accidents because of the use of improper operating measures. Our overhead crane certification is customized for employees who have literacy barriers, reducing certification time by 50 per cent.

Overhead cranes are best for specific repetitive hoisting activities. This type of crane has wide ranging capacities. They may be used for specialized lifting tasks such as removing or installing major plant equipment.

To safely make use of an overhead crane, employees need to employ safe rigging practices. This needs both practice and knowledge. The load should be rigged right in order to ensure its stability when hoisted. Prior to starting a hoisting job, it should be determined that the crane is suitable for the job, with correct capacity, travel and lift. The crane has to be subjected to a thorough physical and visual inspection before utilization. The capacity of all machines, including the slings, hardware and rope, must never go over load weight capacities.

Before using the rigger must know which sling is right for each and every lift and must inspect the rigging hardware and gear. The communications which are used with the crane operator should be concise and clear. A signaler must be chosen for the role and signals should be agreed upon. The operator of the crane must follow instructions just from the chosen individual. If a remote or wired controller is being used, the operator should be trained in all its functions.

Before whatever lifting begins, the path of the load should be cleared of all obstructions and a warning sign should be issued to ensure the safety of the workers. Pedestrian are not under any circumstance allowed to walk below the lift loads. The crane hoist should be centered over the load before lifting in order to prevent swinging. The safety catch must be closed immediately after sliding the sling fully onto the hoisting hook. Sling legs that are not utilized must be secured so they do not drag. Never leave loose materials on a load being hoisted. Watch that fingers and hands are clear when slack is taken out of a sling. Before the lift is carried out, step clear of the danger zone.

Click to Download the pdf